All current holders are designed to hold irons with diameters not larger the 1.5" in diameter.

• Always follow the recommendations of the curling irons manufacturer for proper use and precautions of your iron.
• Most curling irons have an auto shut-off feature after 30 min. It is strongly recommended that user never leaves iron unattended in any case.

The holder is designed with a silicon liner that is capable of handling up to 450°F.

Wall mount holder has 3 options.

1. We strongly recommend that you use the wall mount bracket attached to the stud in the wall with screws provided.
2. In the case the wall stud is not in the proper location for your desired mounting location you can utilize the dry wall anchors provided.
3. If neither of these options will work for your location then you can use the provided adhesive strips.

We have tested option 3 fairly extensively but the surface must be prepared according to manufacturer recommendations for the best results.

Table Clamp holder

• Make sure the counter edge allows at least 3/8" of engagement of the clamp to the surface
• Do not over tighten the clamp, this can cause permanent damage to the holder.
• Tighten just enough so that if you pull on holder it does not release from the clamped surface.

Currently we do not recommend using the holder for anything other then a curling iron. If you are interested in a holder for other devices like a flat iron, please reach out to us at sales@innov8ivewerks.com we are always working on new concepts.

We are currently evaluating other colors that would be available in the future. Feel free to drop us a message to help influence possible future color offerings.